# NOTE: settings in /etc/defautls/slmodemd are used too

# set this to 1 to never run the daemon from the init script
# you can set it if you have an USB device, than the init script won't
# be started at boot (but when the USB device is plugged on)
DONTSTART=0

# This is the default configuration for the slmodem driver daemon
# running on Debian systems.
#	
# Edit device node and country code here ... 
#
# possible country codes are:
#
#   USA
#   GERMANY
#   BELGIUM
#   etc.
#   
#  use 'slmodemd --countrylist' to check out other countries
#
#
#SLMODEMD_DEVICE=slamr0
#SLMODEMD_COUNTRY=GERMANY

SLMODEMD_DEVICE=hw:0,6
SLMODEMD_COUNTRY=ITALY

#
# Additional options for slmodemd, see "slmodemd -h" output for details.
# Do NOT set country or device name here!

OPTS=""

# force the start of the daemon even if old type modules seem to be
# installed (set it to 1)

FORCESTART=0

# set this to not see any hints of the init script on startup

# BEQUIET=1

# set this to not create the /dev/modem symlink

# NOSYMLINK=1